Lectrosonics LMb L Series Digital Hybrid Wireless UHF Belt-Pack
Processing...

Lectrosonics LMb L Series Digital Hybrid Wireless UHF Belt-Pack

Not Yet Rated | Write the First Review
$829.00

Qty

Product Description


  • Covers three standard frequency blocks
  • Digital Hybrid Wireless for compandor-free audio
  • 50 mW RF power
  • Compatibility modes for use with analog receivers
  • 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
  • Integrated multi-function switch for mute or talkback modes
  • Wide range input gain control in 1 dB steps

The LMb transmitter can be configured to operate as a “one touch” device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function.

This versatility makes the transmitter at home in a wide variety of applications from video production to theater, stage and house of worship.

Frequencies are selectable in 100 kHz or 25 kHz steps across a maximum tuning range of 76.7 MHz. This yields a total of 3072 available frequencies across three standard frequency blocks. The tuning range varies in other blocks to meet applicable frequency allocations.

PDF-IconClick here for LMb Data Sheet

PDF-IconClick here for LMb Manual



Consumer Alert:

Most users do not need a license to operate this wireless microphone system. 
Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. 
Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. 
For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC�s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
To operate wireless microphone systems at power greater than 50mW, you must qualify as a Part 74 user and be licensed.

NOTE: This has not changed at all and has been in effect for over 20 years. 
If you qualify and wish to apply for a license go to: http://www.fcc.gov/Forms/Form601/601.html

Please note that this has no bearing on Part 74 users - Television and motion picture production, all licensed AM, FM, TV or broadcast stations, networks, and broadcast entities are not affected by this alert.  
They have always been eligible for Part 74 licensing (for decades now).  
We have included the information they will need for licensing should they decide to do so (thus allowing higher power levels).

Customer Ratings & Reviews

Be the first to rate this item!

Write Review