Zaxcom QRX200 Receiver
The QRX200 is a 200 MHz wide ENG receiver with a tunable tracking front end filter so you can receive on any frequency in any block from 20 through 27 or 512 - 698 MHz. Any combination of Zaxcom TRX series mono or stereo transmitters can be used with the QRX200. Its all new digital modulation gives the QRX200 significantly enhanced distance / range.
A group of 12 multicolored LED's are recessed into the side of the QRX200 for visual confirmation of audio reception. The LED's are very bright and can be seen from quite a distance even in bright sunlight.
The QRX200 outputs audio in both analog and AES digital formats and receives 4 channels of 100% digital audio from up to 2 transmitters. It'sásmall and lightweight to provide optimum compatibility and functionality for broadcasters and freelancers alike.
|Single Mode Receiver Type||True diversity single conversion digital demodulator|
|Dual Mode Receiver Type||Antenna diversity single conversion digital demodulator|
|RF Modulation||Proprietary digital method|
|RF Frequency Range||518 to 698 MHz|
|RF Frequency Step||100 KHz|
|RF Bandwidth||200 KHz|
|Channel Separation||500 KHz (700 KHz recommended)|
|Antenna Connector||50 ohm SMA female|
|Dynamic Range||114 dB|
|DAC Rate||48 kHz|
|Audio Output Level||Line: 10 to 0 dBm active balanced|
|Signal Format||AES Balanced|
|Audio Output Connector||TA 5M|
|Weight||6.0 oz (170 grams)|
|Dimensions||1.25″ x 3.25″ x 5.25″ (32mm x 83mm x 133mm)|
|External Power||9 to 18 VDC (300mA @ 12VDC)|
|Display||Graphic LCD Panel|
Customer Ratings & Reviews
Be the first to rate this item!