Zaxcom QRX235 Receiver

SZAXQRX235 Not Yet Rated | Write the First Review
$2,150.00
Zaxcom QRX235 Receiver
Processing...

Zaxcom QRX235 Receiver

SZAXQRX235 Not Yet Rated | Write the First Review
$2,150.00

Please Select Block:

QRX235 and QRX200 Digital Wireless from Zaxcom on Vimeo.

The QRX235 Rx features all new digital modulation and a QIFB option. The digital modulation gives the QRX235 significantly enhanced distance and range and the QIFB upgrade adds the ability to read time code wirelessly, all while it receives up to 4 channels of 100% digital audio from up to 2 transmitters. Any combination of Zaxcom TRX series mono or stereo transmitters can be used with the QRX235.

The QRX200 outputs audio in both analog and AES digital formats and receives 4 channels of 100% digital audio from up to 2 transmitters . It's small and lightweight to provide optimum compatibility and functionality for broadcasters and freelancers alike.

A group of 12 multicolored LED's are recessed into the side of the QRX200 for visual confirmation of audio reception. The LED's are very bright and can be seen from quite a distance even in bright sunlight.

Receiver
Single Mode Receiver Type True diversity single conversion digital demodulator
Dual Mode Receiver Type Antenna diversity single conversion digital demodulator
RF Modulation Proprietary digital method
RF Frequency Range 518.0 to 872.0 MHz (blocks are 20 to 36 MHz wide)
RF Frequency Step 100 KHz
RF Bandwidth 200 KHz
Channel Separation 500 KHz (700 KHz recommended)
Sensitivity 110 dBm
Antenna Connector 50ohm SMA female
Dynamic Range 114 dB
Distortion 0.00%
DAC Bit Depth 24 bits
DAC Rate 48 kHz
Connector TA5M
Audio Output Level Line: 10 to 0 dBm active balanced
Signal Format AES Balanced
Audio Output Connector TA5M
RF Power Output 50 mW
RF Modulation Digital Spread Spectrum
RF Frequency Range 2.403 to 2.475 GHz
RF Frequency Step 0.001 GHz (1 MHz)
RF Bandwidth 1 MHz
Channel Separation 2 MHz
Antenna Connector 50ohm
SMA Female
Emission Designator 180 KV2E
FCC Part CFR Title 47, Part 18IFB
Dynamic Range 103 dB
Distortion 0.01%
Frequency Response 20 Hz to 12 kHz
System Group Delay 10 ms
Connector Stereo 1/8″ (3.5 mm)
Type Balanced / Unbalanced
Level 10 dBu
Impedance 10 k Ω
ADC Bit Depth 24 bits
ADC Sampling Rate 48 kHz
Connector Stereo 1/8″ (3.5 mm)
Level Range 1 to 5V, PP
Impedance 10 k Ω
Connector Stereo 1/8″ (3.5 mm)
Level Range .2 to 5V, PP
Impedance 8 Ω
Clock Accuracy 1.54 PPM (1 frame out in 6 hours)
Timecode Type SMPTE
Timecode Frame Rates 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Weight 6.0 oz (170 grams)
Dimensions 1.25″ x 3.25″ x 5.25″ (32mm x 83mm x 133mm)
External Power 9 to 18 VDC (300mA @ 12VDC)
Internal Power N/A
Display Graphic LCD Panel

Customer Ratings & Reviews

Be the first to rate this item!

Write Review