Zaxcom Oasis Control Surface for Nomad 12

SZAXOASIS Not Yet Rated | Write the First Review
Zaxcom Oasis Control Surface for Nomad 12

Zaxcom Oasis Control Surface for Nomad 12

SZAXOASIS Not Yet Rated | Write the First Review



Large outboard touch-screen display with an expanded home screen and simple navigation along with 8 motorized hardware faders, transport controls and a whole lot more


Easily input, view and share metadata to everyone on set via MovieSlate®


Go from cart to bag and back again in a matter of moments, Oasis and Nomad are connected with a single cable

The Oasis is a full featured mixing panel with 8 motorized, touch sensitive faders on 3 active banks for up to 40 assignable fader channels. In addition you’ve got hardware trim controls, transport control, dedicated PFL keys, routing control and more!

The Oasis controls Nomad 12 via a single serial control cable, all the processing and recording stay within the Nomad. This turns Nomad 12 into a no compromise cart based mixing and recording system that can quickly and seamlessly transition from a cart to a bag.

Oasis features include:
-Full featured touch screen and / or computer interface
-Direct ZaxNet gain control of Digital Recording Wireless
-Full function playback controller for simultaneous audio playback while recording
-Direct interface with the Zaxcom RX-12 wireless receiver
-Ultra-low power consumption of 2.4 watts (200ma @ 12 volts)
-Direct access to all Nomad mixing controls
-Instant access and editing of metadata via touch screen or keyboard
-MovieSlate® Wi-Fi interface for direct sharing of metadata
-MP3 transcription recorder with timecode and metadata writes directly to microSD card for instant client delivery
-MP3 file transfer directly from Nomad Touch via standard Wi-Fi connection via e-mail or FTP


    • Required: Nomad 12
    • Meters: 8 with 6 LED segments per meter
    • Faders: 8 x 100 mm motorized
    • Trimmers: 8 rotary
    • Weight: 4 lbs (1.8 kg)
    • Dimensions: (H x W x D): 3″ x 10.75″ x 12.75″ / 76 mm x 273 mm x 324 mm
    • USB: 1 computer connection
    • Serial: 3 x RS422
    • Power Consumption: 8 to 16 VDC @ 300 mA
    • Power Connector: 4-Pin XLR Male
    • 8 x 100mm Linear fader
    • 5 x Fader bank selections
    • 8 x Input trim adjustments
    • 8 x Output level adjustments
    • 3 x Headphone memory selections
    • 8 x PFL keys
    • 8 x Bus routing keys
    • 3 x Communication keys


Customer Ratings & Reviews

Be the first to rate this item!

Write Review