ZAXCOM IFB200 Zaxnet Transceiver with built-in recorder

SZAXIFB200 Not Yet Rated | Write the First Review
$1,350.00
ZAXCOM IFB200 Zaxnet Transceiver with built-in recorder
Processing...

ZAXCOM IFB200 Zaxnet Transceiver with built-in recorder

SZAXIFB200 Not Yet Rated | Write the First Review
$1,350.00

The IFB200 can be used as either a transmitter or receiver.  As a transmitter, it sends IFB audio, timecode and remote control commands to our TRX digital recording wireless transmitters and ERX receivers.  It can also be used to monitor audio from a QRX or any other ZaxNet transmitter.  The signals are carried on a single RF channel over a 2.4 GHz signal and can be used license-free in almost every country with an IFB audio range of approximately 100 feet and an IFB timecode and remote control range of approximately 400 feet.

The front has a graphic LCD screen showing timecode and transmitter status.  The IFB200 has a built-in 2-channel mixer for combining two separate channels into a mono transmission signal.

The IFB200 can be used in an array of applications - sound cart, sound bag, studio or on the side of your video camera.

 

SPECIFICATIONS

  • IFB RF TRANSMITTER
    • RF Power Output: 75 mW
    • RF Modulation: Digital Spread Spectrum
    • RF Frequency Range: 2.403 to 2.475 GHz
    • RF Frequency Step: 0.001 GHz (1 MHz)
    • RF Bandwidth: 1 MHz
    • Channel Separation: 2 MHz
    • Antenna Connector: 50-ohm SMA Female
    • Emission Designator: 180 KV2E
    • FCC Part: CFR Title 47, Part 18
  • IFB AUDIO TRANSMITTER
    • Dynamic Range: 103 dB
    • Distortion: 0.01%
    • Frequency Response: 20 Hz to 12 kHz
    • Highpass Filter: Off or 30 to 220 Hz, Step: 10 (6 dB Per Octave)
    • System Group Delay: 10 ms
  • IFB ANALOG OR DIGITAL AUDIO INPUT
    • Connector: TA-5M
    • Type: Balanced
    • Level: -10 dBu tp +4 dBu
    • Impedance: 10 k Ω
    • ADC Bit-depth: 24 bits
    • ADC Sampling Rate: 48 kHz
  • TIMECODE INPUT/OUTPUT
    • Connector: BNC
    • Input Level Range: 1 to 5V, P-P
    • Output level 2V P-P
    • Impedance: 75 Ω
  • TIMECODE READER / GENERATOR
    • Clock Accuracy: 1.54 PPM (1 frame out in 6 hours)
    • Timecode Type: SMPTE
    • Timecode Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
  • PHYSICAL
    • Weight: 7.3 oz
    • Dimensions: 3.6″ x 3.23″ x 1.0″
    • External Power: 8 to 18 VDC @ 180 mA
    • Internal Power: N/A
    • Display: Graphic LCD Panel

 

Customer Ratings & Reviews

Be the first to rate this item!

Write Review