Wendt X3 3-Channel Mixer

SWENX3 Not Yet Rated | Write the First Review
$1,500.00
Wendt X3 3-Channel Mixer
Processing...

Wendt X3 3-Channel Mixer

SWENX3 Not Yet Rated | Write the First Review
$1,500.00

A high-quality, full-function, portable, 3-channel audio mixer!

The new X3 brings the exceptional reliability and build quality of the Wendt X4 and X5 mixers into the smaller realm of a three-channel audio mixer.

This premium low-noise mixer has all the features necessary for recording top quality sound for any film or television application. The X3 can be linked to the X5 mixer for a full eight channels of reality TV mixing.

The inputs are mic or line switchable and phantom power is available on all three inputs. The X3 also offers pan switches, a slate mic and a 1/4" headphone jack, and unbalanced AUX and balanced XLR mic-line switchable outputs. Six AA batteries give you an estimated 12-15 hours of use.

One-year limited warranty.
CE qualified

Technical Specifications

Size: 5.5 in. x 6.225 in. x 2 in. (140mm x 158mm x 51mm)
Weight: 1.9 lbs. (0.86 Kg) 
Temperature Range: -20 to +70C
Batteries: 6 x AA, estimated use 12-15 hours 
Frequency Response: 25-20kHz
Noise: EIN-128dBV 
Low-Cut Filter: 100Hz, 140Hz, 12db/octave
Return: 3.5mm stereo jack 
Distortion: Less than 0.1% THD
Mic Powering: 48v PH and Dynamic
Mic-Line Input: Switchable 
Tone Oscillator: 400 Hz, 0dB VU
Line Output: Balanced XLR mic-line, switchable
Aux Output: Unbalanced TA5 mic-line, switchable
Link Output: Link to Wendt X5 for 8 matched channels
Other Features Limiter, PAN switches, external power (9-18v), slate mic, phone jack (1/4 in.), blue LED display brightness switch.


Front Panel

Channel Faders Channel 1, 2 and 3 correspond to the mic inputs (1,2, & 3)
Stereo VU Display (LED) Blue LEDs -12dB, -9dB, -6dB, -3dB, 0dB and red LED +3dB
Low Cut Filters The three position switch, 140HZ, 20HZ, and 100HZ at 12dB per octave
Pan Switches Channel 1, 2, and 3 channel 3 pan switches (right, center and left)
Reference Tone 0dBVU 400HZ low distortion sine wave
Slate Mic Low noise slate mic to right and left outputs
Power Monitor LED flashes on and off for normal power (voltage) and continuously on for low power
Battery Test Switch Battery voltage is indicated on the right LED display
Power Switch Mixer powering INT (batteries), EXT (external power) and OFF
RTN Mix Switch Switches phones from external source to mixerv HP Monitor Switch CTR = Stereo, RT = Right Ear (R+L), LT = Left Ear (L+R)

 
Left Side Panel
 

Mic Inputs, Channel 1, 2, and 3 XLR electronically balanced
Mic Powering 48 phantom and dynamic
Mic-Line Switch MIC or LINE (-50dB attenuation)
Preamplifier Gain Switchable attenuation 10dB, 20dB and 0dB
HP Volume Headphone volume control
VU LED Switchable display brightness: bright (sunlight), normal, and off
Limiter Limiter in/out switchable

 
Right Side Panel
 

Phone Jack 1/4" stereo
Slate Volume Screwdriver volume adjustment
XLR Mic-Line Outputs Right and left line outputs, switchable MIC or LINE levels
External Power Mixer powering from an external DC power source of 9-18VDC (Hirose 4-pin connector, pin 4 +V, pin 1 -V)
Return 3.5mm stereo jack
LINK/AUX OUT 5-pin TA connector; link to Wendt X5 Mixer (pin 1 right, pin 3 left); AUX OUT (pin 2 right, pin 4 left), switchable (AUX switch) MIC-LINE. AUX outputs can be configured to Mono Out by shorting Right to Left pins in mating connector.
Battery Compartment Six AA batteries

 

Customer Ratings & Reviews

Be the first to rate this item!

Write Review