The original SQN-5S as successor to the classic SQN-4S Series IVe offered the same convenience of operation in exactly the same size case but with five channels and reduced weight. Recordists familiar with the earlier mixer were immediately at home with the SQN-5S and organizations that had been using the 4S found the new mixer to be completely compatible with the old.
The new SQN-5S Series II expands upon the virtues of its predecessor, including transformerless input and output amplifiers for reduced weight and uninhibited bass, virtually unbreakable analogue level meters, four channels of pre-fade listening, slating microphone, superb limiter, output feed for all five microphone channels and logic processing of most switching giving a minimal length audio path.
Now there are two separate pairs of electronically balanced output line drivers and two pairs of monitor return inputs (with front panel selection), allowing the use of two cameras or recorders. A simple adaptor cable can be used to provide a second interface to standard SQN cabling. There are also four unbalanced outputs, three on 3.5mm jacks and one on a multi-way connector. One jack is dedicated to mic level. Phones output is on both quarter inch and 3.5mm jacks. Using 8 AA size internal alkaline cells, the SQN-5S easily gets through the working day without reloading, delivering 48V phantom power until the cells are completely exhausted. The quick change battery compartment permits reloading in seconds. External power can be from 6V to 24V dc, positive or negative to ground or floating.
Customer Ratings & Reviews
Be the first to rate this item!