Shure SM86 LC Cardioid Condenser Handheld Microphone Cable not included

SSHUSM86LC Not Yet Rated | Write the First Review
$179.00
Shure SM86 LC Cardioid Condenser Handheld Microphone Cable not included
Processing...

Shure SM86 LC Cardioid Condenser Handheld Microphone Cable not included

SSHUSM86LC Not Yet Rated | Write the First Review
$179.00

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.

A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise. 

  • Condenser cartridge for studio quality sound

  • Tailored frequency response for a clear reproduction of vocals

  • Rugged construction withstands the rigors of touring sound

  • Cardioid polar pattern minimizes unwanted background noise

  • Excellent choice for stage monitors and personal monitors

  • Built-in three-point shock mount minimizes handling noise

  • Two-stage "pop" filter reduces wind and breath noise

Transducer Type

Condenser (electret bias)

Frequency Response

50 to 18,000 Hz

Polar Pattern

Cardioid

Output Impedance

150 Ohms at 1 kHz

Recommended minimum load impedance: 600 Ohms

Sensitivity (at 1,000 Hz)

Open Circuit Voltage: -50 dBV/Pa (3.15 mV)

(1 Pa = 94 dB SPL)

Output Clipping Level

1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)

Maximum SPL (at 1,000 Hz)

1000 ohm load (1% THD): 147 dB

Self-Noise

23 dB typical, A-weighted

Dynamic Range (1000 ohms)

124 dB (maximum SPL to A-weighted noise level

Signal-to-Noise Ratio

71 dB at 94 dB SPL (IEC 651)*

*S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

Polarity

Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.

Power

Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3

Current Drain: 5.2 mA

Connector

Three-pin (XLR) professional audio

Case

Dark gray enamel-painted steel with matte-finished silver colored steel grille

Dimensions

See User Guide

Net Weight

Net: 278 grams (9.8 oz)

Environmental Conditions

Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F) (relative humidity >90%)

Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity >80%)

Customer Ratings & Reviews

Be the first to rate this item!

Write Review