Sennheiser K6 Microphone Combo Packs ME66/K6P COMBO Shotgun Microphone System (Phantom Power Only)

SSENME66K6PCOMBO Not Yet Rated | Write the First Review
$499.95
Sennheiser K6 Microphone Combo Packs ME66/K6P COMBO Shotgun Microphone System (Phantom Power Only)
Processing...

Sennheiser K6 Microphone Combo Packs ME66/K6P COMBO Shotgun Microphone System (Phantom Power Only)

SSENME66K6PCOMBO Not Yet Rated | Write the First Review
$499.95

Purchase an ME 66 short shotgun capsule with any K6 powering module and get $50 back by mail-in rebate. Rebate good thru December 31, 2012. CLICK HERE FOR REBATE

The ME 66 is a short gun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.

Features

  • Super-cardioid/lobar pick-up pattern

  • Highly directional

  • Low inherent self-noise

  • High sensitivity

  • Wide frequency response

Dimensions

22,5 x 221 mm

Frequency response (microphone)

40.....20000 Hz +- 2,5 dB

Transducer principle (Microphone)

pre-polarised condenser microphone

Pick-up pattern

super-cardioid/lobar

Sensitivity in free field, no load (1kHz)

50 mV/Pa +- 2,5 dB

Nominal impedance

200 Ohm (K6)

Min. terminating impedance

1000 Ohm ( K6)

Equivalent noise level

10 dB

Equivalent noise level weighted as per CCIR 468-3

21 dB

Maximum sound pressure level (passiv)

125 dB / 1 kHz (K = 1%)

The K6P powering module is at the heart of Sennheiser's professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12 - 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Matt black, anodised, scratch-resistant finish.

Features

  • Switchable bass roll-off filter protects against rumble, handling, pop and wind noise

  • On/off switch

  • High output, low noise

  • Transformerless balanced output on 3-pin XLR connector

Dimensions

d 22 x 52 mm (netto)

Frequency response (microphone)

30.....20000 Hz +- 1 dB

Transducer principle

pre-polarised condenser microphone

Nominal impedance

200 Ohm, symm.

Min. terminating impedance

1000 Ohm Phantom

Gain

0 dB

Current consumption

2,2 mA

Output voltage

2 V (1 kHz)

Battery Specification

12 - 48V (netto)

Includes:

  • 1 ME 66

  • 1 K6P powering module

  • 1 MZQ 200 microphone clamp

  • 1 protective carrying case

Customer Ratings & Reviews

Be the first to rate this item!

Write Review