powers digital microphones
has both digital and analog outputs
inputs and outputs are available through a Sub-D breakout cable
all control elements are on the front side
The Mini-DA42 serves for powering digital microphones (especially the SuperCMIT) and for converting their output signals to analog.It allows to operate digital microphones at devices which only offer analog inputs.
- AES42, Mode 1 or AES3 (XLR-3F, 110 Ohms)
Outputs (available through included Sub-D breakout cable):
- AES3 (XLR-3M, 110 Ohms)
- 2 נanalog (XLR-3M), balanced, non-floating, maximum cable length: 300 m
Green LED for power; red LED for "unlocked" (turns off when a digital microphone or another device with AES3 signal is connected and the circuitry of the Mini-DA42 locks on to that signal).
DC 12 - 18 V / 200 - 500 mA, available through included AC adapter for 100 - 240 V, 50 / 60 Hz with HIROSE plug
Dynamic range of the Mini-DA42:
112 dB (A, RMS), >98dB (CCIR, q-peak)
Dynamic range of the SuperCMIT with the Mini-DA42:
>107 dB (A, RMS), >96dB (CCIR, q-peak)