Rycote Invision INV-2 Miniature Microphone Shock Mount

The INV-2 is designed specifically for static use on desk & floor stands, when a discrete profile is essential. The lyre suspension webs of these InVision have a small profile designed to isolate in fixed situations for ëcompact' microphone series and ëremote capsule' systems Specification: The InVision lyre webs are just 43mm wide by 40mm high, fit on a standard bar and can be angled by the self adjusting screw. Available with either 9.5mm clip (INV-1), 1 x 9.5mm and 1 x 20mm clip (INV-2) or 20mm clip (INV-3). The clips on the INV-1 and INV-2 hold the microphone by the connector so that a foam gag can be used if required. Fitted with 1 x 20mm clip at the front and a 9.5mm clip at the rear, on InVision (43mm) lyres Small bar - 25mm (1") centres. Suitable for following microphones on static use only: *RODE NT6 *Schoeps CMC (+ KC cable), CCM without foam *Sennheiser MKH8000 used remotely