d:facto II Vocal Mic with SL1 Adapter, Supercardioid
By using original DPA adapters, the d:facto II supercardioid mic head can be used with a variety of other transmitting products.
The SL1 adapter ensures perfect mechanic and electronic fitting to wireless systems from Shure, Sony and Lectrosonics.
With unsurpassed capsule perfection, a three-stage pop-protection grid, perfect shock mounting and an electronic design handling high voltage from the capsule; the d:facto II sounds much more dynamic and distinct than any other wireless, even with entry level systems.
|Note: || All specifications measured with the DPA d:facto II Adapter |
|Directional pattern: || Supercardioid |
|Frequency range, ± 2 dB, at 12 cm (4.7 in): || 100 Hz - 16 kHz with 3 dB soft boost at 12 kHz. Permanent 3rd order low-cut filter (-3 dB at 80 Hz). |
|Sensitivity, nominal, ± 2 dB at 1 kHz: || 5 mV/Pa; -46 dB re. 1 V/Pa |
|Equivalent noise level, A-weighted: || Typ. 19 dB(A) re. 20 μPa (max. 21 dB(A)) |
|S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): || Typ. 75 dB(A) |
|Dynamic range: || Typ. 120 dB |
|Max. SPL, peak before clipping: || 160 dB |
|Power supply (for full specifications): || 48 V Phantom power (± 4 V) |
|Frequency response of DPA d:facto II vocal microphone measured at 12 cm (4.7 in) |
|Directional charcteristics of DPA d:facto II vocal microphone (normalized) |