Audio Ltd. TX2040 Belt-pack transmitter, no mic

SAUD900-241 Not Yet Rated | Write the First Review
$1,429.00
Audio Ltd. TX2040 Belt-pack transmitter, no mic
Processing...

Audio Ltd. TX2040 Belt-pack transmitter, no mic

SAUD900-241 Not Yet Rated | Write the First Review
$1,429.00

Please Select a Frequency:

TX2040 Belt Pack Transmitter, no mic

Battery Bud II

TX2040

 

The TX2040 is compact, sleek and stylishpocket UHF transmitter thats been specially designed for universal wireless use in all segments of field production sound. The TX2040 offers selectable 32 Pre-programed frequencies over a switching bandwidth up to 24 MHz. Great for use on talent with Lavalier mics and for so called “camera hops” when sending mixer outs wireless to cameras.

Menu

The Menu is navigated via the included SwitchiR infrared controller to adjust all parameters. The sound professional can also use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing - great for film and drama.

Mic Input

The mic input is via a durable LEMO 6-pin push/pull locking connector and provides powering for most electret lavalier microphones and also accepts Line Level input sources via our accessory cables.

Powering

Powered by a single 9V type battery which provides up to 6 hours continuous use depending on battery type, NiMH type is recommended. External DC is supplied via the LEMO connector when using our special regulated DC + input cables.

Features:

 

  • 24 MHz Switching bandwidth with 32 Pre-programed frequencies

  • 512 - 698 MHz operating range, specify at time of order

  • Compatible with DX2040 and RK2040 receivers

  • RF output power: 50 mW nominal

  • Menu system driven by infrared with SwitchiR key-fob controler (included)

  • Unit is turned on by plugging in microphone or cable

  • Powered by Single 9V or External DC

  • LEMO locking connector for Lavaliers and input cables w/ External DC

  • Selectable Low Cut Filter of 6dB at 50 Hz

  • 32 factory pre-set frequencies

  • Use Control-X device to switch TX2040 On/Off when it is worn beneath clothing

  • Dimensions: 89 (h) x 60 (w) x 21 (d) mm

  • Weight: 135g

  • Available without microphone or with select Voice Technologies Lavaliers

  • Made in the UK

Extremely durable 6-pin Lemo locking connector for Lavaliers and input cables. "ON" LED and SMA connected removable antenna.

The sleek dimensions and rounded edges of the TX2040 allow it to be comfortable for any application.

The wire Belt Clip easily clips onto various parts of the talent's clothing. If you need to put the TX2040 in a pouch, the belt clip can be easily removed.

 

 

  

Menu Control with SwitchiR


The TX2040 Menu is navigated via the included SwitchiR infrared controller to adjust all parameters. You just need to point the SwitchiR at the top of the unit within a couple inches to make changes. Press the OK button to set the desired value.

The sound professional can use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing - great for film and drama.

It’s so straightforward you won’t need any further written instructions from us.

 

 

Powering the TX2040

 

The battery compartment is integrated into the transmitter
case to prevent the battery coming a drift in use, and has
been designed to accommodate larger 9V batteries. The
TX2040 will often last for a full day without the need to replace
the batteries.

 

 

 

 

  

Lavalier Microphones

 

TX2040 Transmitters are available without microphone or with select Voice Technologies Lavaliers. Popular Lavaliers and Headsets like Sanken, Tram and Countryman can all be wired up with a LEMO 6-pin connector by your dealer.

You can also choose to have a Voice Technologies professional Lavalier included with your TX2040. Available models are VT500 or VT506. Each VT will be supplied with an Otter Box and applicable Lavalier accessories. Mic color is Black.

 

 

Customer Ratings & Reviews

Be the first to rate this item!

Write Review