Audio Ltd. RK6 Rack Frame for (6) DX2040 Receivers

SAUD900-438 Not Yet Rated | Write the First Review
Audio Ltd. RK6 Rack Frame for (6) DX2040 Receivers

Audio Ltd. RK6 Rack Frame for (6) DX2040 Receivers

SAUD900-438 Not Yet Rated | Write the First Review

Please Select a Frequency:

Audio Ltd. RK6, Rack frame for (6) DX2040 receivers



Designed specifically for use on location, the RK6 has been constructed with an 2U all metal frame which makes the unit rugged and reliable. Up to six DX2040 receivers can be plugged into the RK6 and the active distribution amplifier allows all receivers to be fed from one set of antennae. 24 MHz switching bandwidth typical.


The built-in OLED display shows RF level, audio level, TX battery status and headphone monitoring and receivers are configured using a simple menu system on the same panel. All transmitters can be synchronised direct from the front panel using infrared.


The RK6 can be powered from any DC source with voltages from 10-18 volts via a 4-pin XLR socket.

Other features

Other features include auxiliary RF outputs to allow inter-connection to additional RK6 or RK3 units, balanced XLR outputs, phase change switches, auxiliary unbalanced audio outputs and a standard USB connection for firmware updates via a laptop or PC.


  • 24 MHz bandwidth (larger bandwidth available)

  • 512 - 698 MHz operating range, specify at time of order

  • Compatible with TX2040, miniTX and HX2040 transmitters

  • True Diversity

  • Built-in Active distribution amplifier Handles up to (6) DX2040 Receivers

  • (6) Balanced XLR-3 audio Outputs

  • Aux audio outputs - 9-pin D-type unbalanced

  • OLED Display - RF level, diversity switching, audio level, TX battery status, headphone select, frequency

  • Powered by External 10-18V DC via XLR 4-pin (2A max @ 12V)

  • Auxiliary 4-pin Hirose socket allows other equipment to be powered via the rack

  • Masthead amplifier supply - 8V DC Max current @ 8V 100mA

  • Headphone output - 1/4 inch stereo (wired as mono) 30 mW at 32Ω, adjustable

  • BNC Antenna connections @ 50Ω

  • USB type A for remote monitoring and control and firmware updates

  • Dimensions: 179mm (l) x 88mm (h) x 346mm (w)

  • Weight: 6 lbs (without receivers)

  • Made in the UK






Customer Ratings & Reviews

Be the first to rate this item!

Write Review