Audio Ltd. miniTX (2040) transmitter, 3-pin Lemo, no mic

SAUD900-423 Not Yet Rated | Write the First Review
$1,669.00
Audio Ltd. miniTX (2040) transmitter, 3-pin Lemo, no mic
Processing...

Audio Ltd. miniTX (2040) transmitter, 3-pin Lemo, no mic

SAUD900-423 Not Yet Rated | Write the First Review
$1,669.00

Please Select a Frequency:

miniTX Ultra-Miniature Transmitter, no mic

Battery Bud II

miniTX

Ultra-miniature UHF transmitter at just 3" x 2" x .65" that only weighs 3.17 ounces with batteries! Comfortable and easily hidden it is as much a favorite of the artist’s and costumier’s as the professional sound recordist. To make the miniTX as slim and lightweight as possible there are no switches or menu screens. This allows for trouble-free mounting on talent in even the most demanding situations where standard size transmitters just won't do.

Menu

The Menu is navigated via the included SwitchiR infrared controller to adjust all parameters. The sound professional can also use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing - great for film and drama.

Mic Input

The Mic input via a Lemo 3-pin* locking connector provides powering for most electret lavalier microphones. *Lemo wiring of Lavalier mics is same as for Sennheiser SK and Zaxcom. A 4-pin Lemo version is also available for On/Off function.

Powering

Powered only by two AAA type batteries which provides up to 7 hours continuous use depending on battery type. The miniTX is turned off by removing the batteries.

Features:


  • 24 MHz Bandwidth with 32 Pre-programed Frequencies

  • 512 - 698 MHz operating range, specify at time of order

  • Compatible with DX2040 and RK2040 receivers

  • RF Output power: 35 mW, typical

  • Menu system driven by infrared with SwitchiR key-fob controller (included)

  • Powered by two AAA for up to 7 hours

  • Select Standby Mode w/ SwitchiR, remove batteries to turn unit off completely

  • Can use Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing

  • 3-pin Lemo locking connector for Lavaliers (4-pin Lemo also available)

  • Selectable Low Cut Filter at 20 Hz and 80 Hz

  • Available without microphone or with select Voice Technologies Lavaliers

  • Only 3" x 2" x .65", 3.17 ounces with batteries

  • Made in the UK

Back View:
A removable wire Belt Clip easily clips onto various parts of the talent's clothing. miniTX also includes a neoprene pouch.

Side View:
Only 16.5mm thick! The sleek dimensions of the miniTX allow it to be used for any application including stealth on "Features".

Top View:
3-pin Lemo locking connector for Lavaliers. Red Overload an Orange low Battery LED indicators. SMA Antenna Connector. Also available with 4-pin Lemo for On/Off function.

Menu Control with SwitchiR


The miniTX Menu is navigated via the included SwitchiR infra-red controller to adjust all miniTX parameters. You just need to point the SwitchiR at the top of the miniTX within a couple inches to make changes. Press the OK button to set the desired value.

The sound professional can use the Control-X device to switch the transmitter On/Off, even when it is worn beneath clothing - great for film and drama.

It’s so straightforward you won’t need any further written instructions from us.

Battery Power

The miniTX is powered only by two AAA type batteries which
provides about 5 to 7 hours continuous use depending on type.

The miniTX can put into Standby Mode w/ SwitchiR and is
turned off completely by removing the batteries with the Lemo
3-pin version (or Control-X). With the optional Lemo 4-pin version the miniTX on/off is also controlled by plugging in a microphone.

Lavalier Microphones

miniTX Transmitters are available without microphone or with select Voice Technologies Lavaliers. Popular Lavaliers and Headsets like Sanken, Tram and Countryman can all be wired up with a Lemo 3-pin connector by your dealer.

You can also choose to have a Voice Technologies professional Lavalier included with your miniTX. Available models are VT500, VT401HS or VT403. Each VT will be supplied with an Otter Box and Lavalier accessories. Mic color is Black.

Specifications

Frequency range

512 MHz to 698 MHz

Frequency Blocks

Specify at time of order

Switching bandwidth

24 MHz

Number of frequencies

32 pre-programmed

Output power

35 mW typical

RF output connector

SMA 50Ω

Audio input connector

3-pin Lemo (4-pin Lemo available as special order, Push-Pull connector also acts as on/off switch)

Frequency response

50Hz - 18kHz

System THD measured at 1kHz

<0.1% at working levels.
<0.3% at gain position 9 with -6dB input in overload

Gain control range

0 to 30dB in 8 steps

Maximum input level

0dBV gain position 2

Indicators

Red LED = overload, Flashing orange LED = standby mode, Static orange LED = low battery

Battery required

2 x AAA (LR03) 1.5V type alkaline

Battery life

Typically 5 hours with alkaline type batteries, longer with Lithium type

SwitchiR

Switch to Standby, change frequencies and check battery status remotely using the SwitchiR.

Size

82 (h) x 48 (w) x 16.5 (d) mm (3" x 2" x .65")

Weight

3.4 ounces / 98g including batteries

Operating temperature

-20C to +55C

Compliant to

R&TTE (CE), FCC

Lavalier Microphones

Can power most lavalier and headworn microphones. Can be delivered with VT500, VT401HS or VT403

Customer Ratings & Reviews

Be the first to rate this item!

Write Review