Audio Ltd. En2 TXPH Belt Pack Transmitter and VT500 Lavalier w/ Otter box and Accessories

SAUD900-460H5 Not Yet Rated | Write the First Review
$1,383.00
Audio Ltd. En2 TXPH Belt Pack Transmitter and VT500 Lavalier w/ Otter box and Accessories
Processing...

Audio Ltd. En2 TXPH Belt Pack Transmitter and VT500 Lavalier w/ Otter box and Accessories

SAUD900-460H5 Not Yet Rated | Write the First Review
$1,383.00

Please Select a Frequency:

TXPH Belt Pack Transmitter

Battery Bud II

TXPH

A small pocket UHF transmitter thats been specially designed for universal wireless use in all segments of field production sound. The TXPH offers selectable 100 mW or 50 mW RF output power and up to 40 MHz switching bandwidth. Great for use on talent with Lavalier mics and for so called “camera hops” when sending mixer outs wireless to cameras.

Menu

The intuitive Menu uses a blue Organic Light Emitting Diode (OLED) display which is extremely clear yet consumes very little power. All parameters are set by scrolling the wheel on the top of each unit to the left or right and pressing the wheel down to set the desired value.

Mic Input

The mic input is via a durable Binder 5-pin locking connector and provides powering for most electret lavalier microphones and also accepts Line Level input sources via our accessory cables. Binder is a top quality audio connector brand manufactured in Germany

Powering

Powered by a single 1.5V AA type battery which provides up to 4-6 hours continuous use depending on battery type, NiMH type is recommended. External 6-18V DC is supplied via the Binder 5-pin connector when using input cables.

Features:

  • up to 40 MHz Switching bandwidth in 25 kHz steps

  • 512 - 572 MHz and 614 - 694 MHz operating ranges - via 4 frequency blocks

  • Compatible with En2 DX, DX2 and CX2 receivers

  • Selectable output power, 100 mW or 50 mW

  • Menu system driven by OLED display and 3-position navigation wheel

  • Powered by Single AA or 6-18V External DC (120mA @ 12V)

  • 5-pin Binder locking connector for Lavaliers and input cables w/ External DC

  • Selectable Low Cut Filter at 80 Hz, 120 Hz and OFF

  • 32 factory pre-set frequencies

  • 32 user selected frequencies can be stored

  • Dimensions: 63 x 82 x 20 mm

  • Available without microphone or with select Voice Technologies Lavaliers

  • Made in the UK

Back View:
The wire Belt Clip easily clips onto various parts of the talent's clothing. If you need to affix the TXPH in a pouch, the belt clip can be easily removed.

Side View:
Only 20mm deep!
The sleek dimensions of the TXPH allow it to be used for any application.

Top View:
Extremely durable 5-pin Binder locking connector for Lavaliers and input cables. 3-position Nav wheel and SMA connected removable antenna.

Battery Bud Cable

Menu Control

The TXPH is set up using a series of menus which are viewed in the OLED display. All important settings are represented by icons on the HOME screen.

The menu is incredibly intuitive and a snap to work with under pressure in the field. It has a programable screen saver to save battery life. OLED displays are even readable in bright sunlight.

The Menu is so straightforward you won’t need any further written instructions from us to operate the TXPH.

Powering the TXPH

The TXPH is powered by a single 1.5V AA type battery that
provides up to 6 hours continuous use depending on battery type.
The NiMH type is recommended for optimal battery life.

External 6-18V DC is supplied via the Binder 5-pin connector when using input cables.

Click HERE to view our Transmitter Input + DC cables

Lavalier Microphones

TXPH Transmitters are available without microphone or with select Voice Technologies Lavaliers. Popular Lavaliers and Headsets like Sanken, Tram and Countryman can all be wired up with a Binder 5-pin connector by your dealer.

You can also choose to have a Voice Technologies professional Lavalier included with your TXPH. Available models are VT500, VT401HS or VT403. Each VT will be supplied with an Otter Box and applicable Lavalier accessories.

Specifications

Frequency Range

512 - 572 MHz and 614 - 694 MHz operating ranges via 4 Frequency Blocks

Frequency Blocks

F1 = 512 to 542 MHz (30 MHz span)

F2 = 542 to 572 MHz (30 MHz span)

F3 = 614 to 654 MHz (40 MHz span)

F4 = 654 to 694 MHz (40 MHz span)

Other Frequency Blocks - Special Order

Special Order Blocks available including 470-496 MHz, 496-524 MHz, 572-608 MHz

Switching bandwidth

up to 40 MHz in 25kHz steps

Number of factory pre-set frequencies

32

Number of user selectable frequencies

32 (selectable in 25kHz steps)

Output power

100 mW or 50 mW nominal, selectable

Modulation mode

Wideband FM

Frequency stability

0.002%

Audio frequency response

50 - 18kHz 2dB

Signal-to-noise ratio

>100dB (45kHz deviation)

Total harmonic distortion

<0.3% typ. (45kHz deviation, 1kHz)

Audio gain control

0-35dB (in 10 steps)

Input connector

Binder 5-pin screw locking

Display

OLED blue

Control

3 position navigation switch

Battery type

1 x 1.5V Alkaline LR6 AA size

Battery life

4 to 6 hours depending on battery type and RF power selected

External supply voltage

6 - 18V DC (120mA @ 12V)

Operating temperature range

-20 C to +55 C

Weight

4.16 ounces / 118g (without batteries)

Dimensions

63mm (W) x 82mm (H) x 20mm (D)

Lavalier Microphones

Can power most lavaliers and can be delivered w/ VT500, VT401HS or VT403

Customer Ratings & Reviews

Be the first to rate this item!

Write Review