Audio Ltd. En2 miniTX Miniature Transmitter with VT403 Lavalier w/ Otter box and Accessories

SAUD900-463H3 Not Yet Rated | Write the First Review
$1,988.00
Audio Ltd. En2 miniTX Miniature Transmitter with VT403 Lavalier w/ Otter box and Accessories
Processing...

Audio Ltd. En2 miniTX Miniature Transmitter with VT403 Lavalier w/ Otter box and Accessories

SAUD900-463H3 Not Yet Rated | Write the First Review
$1,988.00

Please Select a Frequency:

miniTX Ultra-Miniature Transmitter w/ included VT403 Omni Lavalier, Ultra-miniature cylindrical, Hi-SPL handling, water resistant

Battery Bud II

miniTX

Ultra-miniature UHF transmitter at just 3" x 2" x .65" that only weighs 3.17 ounces with batteries! Comfortable and easily hidden it is as much a favorite of the artist’s and costumier’s as the professional sound recordist. To make the miniTX as slim and lightweight as possible there are no switches or menu screens. This allows for trouble-free mounting on talent in even the most demanding situations where standard size transmitters just won't do. Up to 40 MHz switching bandwidth.

Menu

The Menu is navigated via the included SwitchiR infrared controller to adjust all miniTX parameters. You just need to point the SwitchiR at the top of the miniTX within a couple inches to make changes. Press the OK button to set the desired value. Great feature for when the miniTX is “dressed” on the talent already.

Mic Input

The Mic input via a Lemo 3-pin* locking connector provides powering for most electret lavalier microphones. *Lemo wiring of Lavalier mics is same as for Sennheiser SK and Zaxcom.

Powering

Powered only by two AAA type batteries which provides up to 7 hours continuous use depending on battery type. The miniTX is turned off by removing the batteries.

Features:

  • up to 40 MHz Bandwidth with 32 Pre-programed Frequencies

  • 512 - 572 MHz and 614 - 694 MHz operating ranges - via 4 frequency blocks

  • Compatible with En2 DX, DX2 and CX2 receivers

  • RF Output power: 50 mW, typical

  • Menu system driven by infrared with SwitchiR key-fob controller (included)

  • Powered by two AAA for up to 7 hours

  • Select Standby Mode w/ SwitchiR, remove batteries to turn unit off completely

  • 3-pin Lemo locking connector for Lavaliers (4-pin Lemo for on/off function available as special order)

  • Selectable Low Cut Filter at 20 Hz and 80 Hz

  • Available without microphone or with select Voice Technologies Lavaliers

  • Only 3" x 2" x .65", 3.17 ounces with batteries

  • Made in the UK

Back View:
The wire Belt Clip easily clips onto various parts of the talent's clothing. miniTX also includes a neoprene pouch, the belt clip can be easily removed.

Side View:
Only 16.5mm thick! The sleek dimensions of the miniTX allow it to be used for any application including stealth on Features.

Top View:
3-pin Lemo locking connector for Lavaliers. Blue Power-On, Red Overload an Orange low Battery LED indicators. SMA Antenna Connector

Menu Control with SwitchiR

The miniTX Menu is navigated via the included SwitchiR infrared controller to adjust all miniTX parameters. You just need to point the SwitchiR at the top of the miniTX within a couple inches to make changes. Press the OK button to set the desired value.

It’s so straightforward you won’t need any further written instructions from us.

Battery Power

The miniTX is powered only by two AAA type batteries which
provides about 5 to 7 hours continuous use depending on type.

The miniTX can put into Standby Mode w/ SwitchiR and is
turned off completely by removing the batteries.

Lavalier Microphones

miniTX Transmitters are available without microphone or with select Voice Technologies Lavaliers. Popular Lavaliers and Headsets like Sanken, Tram and Countryman can all be wired up with a Lemo 3-pin connector by your dealer.

You can also choose to have a Voice Technologies professional Lavalier included with your miniTX. Available models are VT500, VT401HS or VT403. Each VT will be supplied with an Otter Box and Lavalier accessories. Mic color is Black.

Specifications

Frequency Range

512 - 572 MHz and 614 - 694 MHz operating ranges via 4 Frequency Blocks

Frequency Blocks

F1 = 512 to 542 MHz (30 MHz span)

F2 = 542 to 572 MHz (30 MHz span)

F3 = 614 to 654 MHz (40 MHz span)

F4 = 654 to 694 MHz (40 MHz span)

Other Frequency Blocks

Special Order blocks available including 470-496 MHz, 496-524 MHz, 572-608 MHz

Switching bandwidth

up to 40 MHz in 25kHz steps

Number of frequencies

32 pre-programmed

Output power

50 mW typical

RF output connector

SMA 50Ω

Audio input connector

3-pin Lemo (4-pin Lemo available as special order, Push-Pull connector also acts as on/off switch)

Frequency response

50Hz - 18kHz

System THD measured at 1kHz

<0.1% at working levels.
<0.3% at gain position 9 with -6dB input in overload

Gain control range

0 to 30dB in 8 steps

Maximum input level

0dBV gain position 2

Indicators

Blue LED = On, Red LED = overload, Flashing orange LED = standby mode, Static orange LED = low battery

Battery required

2 x AAA (LR03) 1.5V type alkaline

Battery life

Typically 5 hours with alkaline type batteries, longer with Lithium type

SwitchiR

Switch to Standby, change frequencies and check battery status remotely using the SwitchiR.

Size

82 (h) x 48 (w) x 16.5 (d) mm (3" x 2" x .65")

Weight

3.4 ounces / 98g including batteries

Operating temperature

-20C to +55C

Compliant to

R&TTE (CE), FCC

Lavalier Microphones

Can power most lavalier and headworn microphones. Can be delivered with VT500, VT401HS or VT403

Customer Ratings & Reviews

Be the first to rate this item!

Write Review