Audio Ltd En2 DX Compact True Diversity Receiver, Binder 7-pin output

SAUD900-454 Not Yet Rated | Write the First Review
$1,479.00
Audio Ltd En2 DX Compact True Diversity Receiver, Binder  7-pin output
Processing...

Audio Ltd En2 DX Compact True Diversity Receiver, Binder 7-pin output

SAUD900-454 Not Yet Rated | Write the First Review
$1,479.00

Please Select a Frequency:

DX True Diversity Receiver

Battery Bud II

DX

The DX is the world’s smallest battery powered True Diversity UHF wireless receiver. Designed for universal use in all segments of field production sound offering crystal clear sound, stellar True Diversity RF range, spectrum analyzer table scanning and up to 40 MHz switching bandwidth.

Menu

The Menu uses a blue Organic Light Emitting Diode (OLED) display which is extremely clear yet consumes very little power. All parameters set by scrolling the wheel on the top of each unit to the left or right and pressing the wheel down to set the desired value.

Output

The receiver output and External DC are via a durable Binder 7-pin locking connector. We offer a selection of cables to balanced XLR with DC connections for use with popular battery distribution systems. Binder is a top quality audio connector brand manufactured in Germany

Powering

Powered by a single 1.5V AA type battery which provides up to 3 hours continuous use. External 6-18V DC is connected via the Binder 7-pin connector.

Features:

  • up to 40 MHz Switching bandwidth in 25 kHz steps

  • 512 - 572 MHz and 614 - 694 MHz operating ranges - via 4 frequency blocks

  • Compatible with En2 TXPH and miniTX transmitters

  • True Diversity

  • Scan for open frequency or for Transmitter

  • Table Scan with Spectrum Analyzer type display in 200kHz steps

  • Menu system driven by OLED display and 3-position navigation wheel

  • Output: adjustable Line Level output or Headphone driver with attenuator

  • Use as bullet-proof Diversity IFB receiver in Headphone mode (requires 3.5mm receptacle cable adaptor)

  • 7-pin Binder locking connector for output cables w/ or w/out External DC

  • Powered by Single AA or 6-18V External DC via 7-pin Binder, 120mA @ 12V

  • 32 factory preset frequencies available

  • 32 user selected frequencies in 25 kHz steps can be stored

  • Made in the UK


What is ‘true diversity’?


Most manufacturers offer ‘diversity receivers’ with two antennae connected to only a single receiver. Signal switching
takes place between the antennae (at rf level) which means there is often an audible ‘click’ on the recorded sound as
the signal being delivered to the receiver is momentarily interrupted during switching. With the true diversity DX,
that problem doesn’t happen since switching takes place between the two receivers at the audio frequency level with
no interruption of signal.

Battery Bud Bottom Battery Bud Top

Back View:
The wire Belt Clip easily clips onto various parts of your audio bag. To affix the DX to a camera, we offer a durable, snap-in receiver shoe bracket.

Side View:
Only 20mm thick! The sleek dimensions of the DX allow it to be used in audio bags and on camcorders - even small format DSLR cameras.

Top View:
Extremely durable 7-pin Binder locking connector for output cables + External DC, 3-position Nav wheel and SMA connected removable antennas.

Battery Bud Cable

Menu Control

The DX is set up using a series of menus which are viewed in the OLED display. All important settings are represented by icons on the HOME screen.

The menu is incredibly intuitive and a snap to work with under pressure in the field. It has a programable screen saver to save battery life. OLED displays are even readable in bright sunlight.

The Menu is so straightforward you won’t need any further written instructions from us to operate the DX.

DX Powering

The DX is Powered by a single 1.5V AA type battery which
provides up to 3 hours continuous use. External 6-18V DC is connected via the Binder 7-pin connector. The NiMH type is recommended optimal battery life.

Cables and Accessories

Interconnects are as important as the units themselves. Audio Ltd. makes super high-quality cables and accessories to complement their products and provide assurance and confidence in the field.

Click HERE or cable image to view our output cables and accessories for the DX receiver.

Specifications

Frequency Range

512 - 572 MHz and 614 - 694 MHz operating ranges via 4 Frequency Blocks

Frequency Blocks

F1 = 512 to 542 MHz (30 MHz span)

F2 = 542 to 572 MHz (30 MHz span)

F3 = 614 to 654 MHz (40 MHz span)

F4 = 654 to 694 MHz (40 MHz span)

Other Frequency Blocks - Special Order

Special Order Blocks available including 470-496 MHz, 496-524 MHz, 572-608 MHz

Switching bandwidth

up to 40MHz in 25kHz steps

Number of audio channels

1

Receiver type

True Diversity

Number of factory pre-set frequencies

32

Number of user selectable frequencies

32 (selectable in 25kHz steps)

Scan

Scan for open Frequency

Scan for Transmitter

Table Scan with Spectrum Analyzer type display in 200kHz steps

Modulation mode

Wideband FM

Frequency stability

0.002%

Sensitivity

-96dBm (3.5uV) for >40dB SINAD

Image rejection

> 80dB

Audio frequency response

50 - 18kHz 2dB

Signal-to-noise ratio

>100dB (45kHz deviation)

Total harmonic distortion

<0.3% typ. (45kHz deviation, 1kHz)

Audio output voltage (balanced)

0dBV typ. (45kHz deviation, 1kHz)

Audio output attenuator

0dB, -12dB, -24dB, -36dB (selectable)

Monitor/headphone output

30mW at 32Ω, adjustable

Output connector

Binder 7-pin screw locking

Display

OLED blue

Control

3 position navigation switch

Battery type

1 x 1.5V Alkaline LR6 AA size

Battery life

2 to 3 hrs depending on battery type. We recommend use of NiMh

External supply voltage

6 - 18V DC (120mA @ 12V)

Operating temperature range

-20 C to +55 C

Weight

4.16 ounces / 118g (without batteries)

Dimensions

63mm (W) x 82mm (H) x 20mm (D)

Customer Ratings & Reviews

Be the first to rate this item!

Write Review