Pelican Peli™ Lock
Peli™ Lock Fits any Pelican™ Case. Made from brass, will help protect your most important equipment!

Pelican Attaché Lid Organizer
Attaché Lid Organizer. Holds paper, pens, calculator, manuals, files. Made of waterproof Ballistic Nylon, nylon zippers, mesh pockets. Installs with Velcro strip (included).
Specifications: 16-13/16" x 10-1/2"

Porta-Brace® Case Straps
A wide selection of Shoulder Straps designed for carrying Porta-Brace® cases and cameras. The straps are contoured and designed to fit comfortably in the hollow of the shoulder.

GENERAL PURPOSE SHOULDER STRAPS:
Designed to carry Porta-Brace® Cases. The HB-40 shoulder strap is used for heavier loads. For lightweight equipment, plastic clips are available on the HB-10 and HB-15. Specify HB-10P or HB-15P.

Porta-Brace® Side Pockets
SIDE POCKETS provide additional room for important extras, such as batteries, cassettes, connectors or other small items that need to be ready for use. A valued addition to your recorder case or handy to use on your belt.

Porta-Brace® Mic Holsters
Keep your microphone handy, ready to use, with your choice of three sizes of MIC HOLSTERS, 8", 10" and 15" lengths. There is a short front zipper for securing microphone in place. Supplied with two "D" rings for clipping Piggin' Strings (cable ties). Also has a permanently installed cable holder. The belt loop for fastening to a Video Belt , VB-10 keeps hands free.

KATA SUNDO-1
AUDIO SET OPERATING BAG for small mixer, wireless transmitters and many accessories.
                                 SPECIFICATIONS

KATA SUNDO-2
AUDIO SET OPERATING BAG for medium mixer, wireless transmitters and many accessories.
                                          SPECIFICATIONS

Porta-Brace® Audio Case
Made to accommodate an unlimited broad arrangement of mixer, radio mikes, transmitters, batteries, cables, connectors, and equipment. The AUDIO ORGANIZER CASE is now completely reversible so the mixer can be positioned to suit your needs. The top can be removed or completely turned. Main outside pocket can be removed and attached to either side. Special ports were created so cables can be routed into all exterior pockets for snag free wiring versatility. Equipped with leather carry handles and HB-40 shoulder strap. For additional carrying comfort consider our optional AH-2 harness.
Specifications: AH-1U; 10”L x 6”W x 6”H, AH-2U; 14”L x 6”W x 8”H.

Porta-Brace® Wireless Mic Case

The new RM-MULTI and RM MULTI DELUXE CASES hold up to four of the most popular receivers and transmitters (Lectrosonics, Micron, Vega, Sony, etc.) The case is an important component in carrying and protecting these audio components. It fastens to Porta-Brace® mixer and audio cases. Various Porta-Brace® shoulder straps, belts and harness arrangements can give audio crews exactly the solution needed.

Other more specialized cases such as the RM-185 will hold up to two Lectrosonics receivers.

Porta-Brace® Shoulder Case
The SHOULDER CASE is a custom tailored padded camera cover that protects the camera from bumps, hits and scratches. It also reduces the risk of camcorder damage due to precipitation, dust, and other harsh conditions. The case is securely wrapped and strapped around the camera for full time camera protection. The main body is a durable lamination of water repellent 1000 denier cordura, waterproof foam and soft nylon inside A RAINTOP covers the entire top of the camera including the lens. It provides protection against rain, sleet and snow as well as corrosive atmospheres such as, salt sea air and dusty environments. The waterproof raintop is permanently attached and stored in its own pocket. Never left behind. Your camcorder and SHOULDER CASE will fit snuggly into the Quick-Draw, Carry-On, Smuggler and Hiker cases.

Porta-Brace® Travel Boot
The Travel Boot by Porta-Brace® is a companion product to the Shoulder Case (TB-1, 2 or 3). The Travel Boot is made to protect cameras for everyday transport or while carrying through security check points at airports. The boot hugs the camera and lens and takes up no more room than the camera itself. It provides protection while traveling and storing in overhead compartments. This revolutionary new concept really makes it possible to carry your well protected camera with you at all times with a high level of security. Composed of a hard cushioned lens box connected to a camera body wrap. A padded pocket is secured to the camera for carrying the viewfinder while traveling.

Porta-Brace® Mini-DV Camera Case
The MINI-DV CAMERA CASES are designed for quick access to a large number mini-dv cameras. The cradle is adjustable to fit your camera, giving it a secure home allowing any remaining space for accessories. The CS-DV2 and CS-DV3 have a cradle and removable padded pouch for extra batteries and tapes. The pouch can be used in the case, as a pocket, or used as a shoulder bag. The CS-DV4 comes with a cradle and two zippered stuff sacks. The CS-DV-1 comes with cradle only.

Porta-Brace® Quick-Draw Camera Case
The Porta-Brace® QUICK-DRAW Camera Case is designed for working around town and out of a van or car trunk, with plenty of room for a lunch. The top loading case has a wide open fold back top that stays neatly out of the way. It's lightweight with a rigid frame and saves valuable storage space.

FEATURES INCLUDE: Heavy duty shoulder strap and comfortable leather hand grip. Crush proof guard protects view finder. Secures in back seat, fastened securely with seat belt. Holds camera with on-board battery and most wireless configurations attached. Lid closes with Velcro® for quick opening or secured with zippers. Dual purpose rear pouch expands the main compartment 3" or it can be an all-purpose pocket. Special foam blocks hold camera in place and provide lens support. Leather handle heavy-duty shoulder strap and white balance card included.

KATA OHV Sound Harness
OPPOSITE V SOUND HARNESS. Fits all KOALA and SUNDO cases.                                                                
SPECIFICATIONS: 0.92 lbs 0.42 Kg

Porta-Brace® Backpack
The New BACKPACK provides a lightweight, exceptionally strong carrier for small DV cameras, accessories and matte boxes. The Backpack features large external pockets including a pocket for lightweight tripods or zeppelin. Laptop version (BK-2L, 3L) replaces some external pockets with a padded notebook computer pocket. The frame is padded and the divider kit organizes and protects equipment.

Specifications: BK-3L Interior size: 18"Lx12"Wx7½"H.
Padded exterior laptop pocket:14½"Lx11½"Wx2½"H.
Hard drive pocket:6½"Lx9"Wx2½"H.
BK-2L Interior size: 16"Lx11"Wx6"H.
Padded exterior notebook computer pocket 13½Lx10Wx2H

Porta-Brace® Slinger
The SLINGER is for on-the-run action for carrying all kinds of personal accessories. Used by videographers, audiographers, and film makers. It is an over-the-shoulder, bandolier type sling kit. It is form fitting, comfortable to wear and easy to fling on for a quick get-away. A waist cinch strap is provided for extra stability or can be stored in a pocket. It has a padded, non-skid shoulder camera support pad. A large selection of pockets will carry: cell phones, two way radios, beepers, tools, batteries, tapes, cable, note pads, maglites, keys, wallet, watch, rain gear, gloves, hand held mics and more... and it has an ID window.

Porta-Brace® Vest
Now available in BLACK. Newly designed VIDEO VEST is made specially for ENG and EFP photographers and sound technicians. New mid-weight Cordura fabric is very durable, waterproof and has a soft inner layer. There are pockets for batteries, tapes, tools, secure passport and wallet, pens, Rain Slicker, ID, lunch, and even a big cigar. Adjustable side tabs allow extra room over sweaters. Additional side zippers provide extra freedom when needed.

Porta-Brace® Hip Pack
The HIP PACK can be used either in the belly position or fanny position. It has a re-enforced interior main compartment and a wide quick release waist belt. The main compartment will hold tapes and batteries or small cameras. Extra front and top pockets hold small items. There is a pocket for your keys on the waist belt. Comes with a Porta-Brace® water bottle. For mini-dv cameras, see models Hip-3 and Hip-4.

KATA Koala-1
MIXER CASE for small mixers.                              
                                      SPECIFICATIONS

KATA Koala-2
MIXER CASE for large mixers.     
                                      SPECIFICATIONS

KATA Koala-3
MIXER CASE for medium      mixers.                                                                  
                                      SPECIFICATIONS

Porta-Brace® Mixer Case
MIXER CASES are custom fit to a particular mixer. Flaps, clear vinyl windows and protective coverings provide access to cable openings, batteries, dials and switches. The mixer cases are padded to protect your mixer and accessories. Depending on your mixer configuration the Porta-Brace® Mixer Case includes: main mixer compartment, radio mic compartment, and a shoulder strap. Each case component is custom fitted to your sound equipment. An optional AUDIO HARNESS/BELT combination helps provide additional stability and weight distribution.

The MXC-442 fits Sound Device 442 mixer. Holds NP-1 or BP-90 batteries. Includes RM-DeLuxe detachable pocket for headphones, wireless receivers, hand held mics and more. HB-10 Shoulder Strap included.

Porta-Brace® Script Case
The SCRIPT CASE is made for hanging on the arm of the Location Chair. It is a fully functional Porta-Brace® brief case with three outside pockets including pockets for a walkie-talkie and cellular phone. An expanding interior compartment has slip pockets for papers and pockets for many other items. It includes leather handles and the Porta-Brace® suede leather shoulder strap.

Specifications: Interior measures 14"L x 3½"W x 11"H

Porta-Brace® Directors Case
This soft shell Brief Case has a large inside pocket and roomy outside flap compartment, lots of room for file folders, scripts, proposals, note pad, and all the rest of the paper you can’t avoid carrying. Several large outside slip pockets, one with zipper for extra security, keep clipboard or notebook ready at hand and smaller slip pockets for whatever you need a place for at the moment. Computer cases have well padded front pockets. Suede Shoulder Strap HB-10 included.

Porta-Brace® Medium Production Case
The Porta-Brace® MEDIUM SIZE PRODUCTION CASES are crush proof. Shaped by a full width, rigid panel, between layers of Cordura Nylon. They have a bonded foam and plastic, lightweight rigid lid. Interior partitions can be positioned to accommodate numerous combinations of cassettes, batteries, mics, cables, filters, wireless mics and mixers. Included in the case is a small clip-on pouch with a window for keeping track of small items such as adapters and attenuators. See-through mesh pockets in the top flap provide convenient access to things often used. Two sewn on end pockets and a large mesh slip pocket provide room for extras, and a well positioned mic holster adds to the versatility of these cases.

Porta-Brace® Large Production Case
The Porta-Brace® LARGE SIZE PRODUCTION CASES lets you organize a load of accessories in one efficient, easy to carry protective package. Your fragile equipment is thoroughly protected. The Production Case gives you the security, durability and quick access of a hard case, with much less weight and greater convenience. Production Cases feature: a roomy interior with easily adjusted partitions for securing a variety of equipment. A pocket system in top lid with see-through mesh (lets you locate small items at a glance), and an abundance of sturdy outside pockets of various sizes and shapes, color coded tabs to help you organize. Also includes a heavy-duty nonslip shoulder strap for comfortable and secure carrying.

Porta-Brace® Wheeled Case
The Porta-Brace® WHEELED CASES are for transporting all kinds of heavy loads for studio, audio, video and film equipment. The cases are designed to be used for handling gear on location as well as transporting apparatus to the job site. They are constructed of a strong ridged interior frame covered with 1,000 denier Cordura® nylon fabric, with padded protection all around. Wheels with long axles for good tracking.
A comfortable, well shaped Vermont hard maple handle is mounted on strong steel telescoping beams which retract into the case for snag proof shipping. A divider kit is provided which allows customizing of an infinite number of storage compartments. 

Porta-Brace® Size Wize Case
The Size Wize Production Case was developed with air travel in mind to carry all kinds of equipment and accessories. The overall allowable size for hand luggage is currently 45" (L+W+H) on most airlines, and this bag is exactly that. The case carries the greatest amount of equipment with you within airline maximum size limitations. We used a unique, strong, padded, “thinwall” construction to give you the maximum packing space on the inside. In addition, your Size Wize Production Case features a snag free travel cover, a heavy duty shoulder strap, and our new movable partition system.

Specifications: Inside dimension: 22" x8" x13" Outside dimension: 23" x9" x13"

Pelican Micro Case Series™
With the new Micro Case Series™ you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. Every Micro case is available in solid color or clear with matching liner and speed lock. They include a ring and a lanyard for easy attachment.
Micro Cases are excellent for trips or outdoor activities when you need to protect your valuables from water, falls, knocks, sun, atmospheric changes, etc. and they are small enough to fit into luggage, bags, glove compartments, other Pelican Protector Cases™ and so on.
And remember, smaller does not mean less strong. Micro Cases are just as durable as the larger models. You break it, we replace it… forever.
Specifications: Range in size from 5 7/16" to 9 3/8" and are available in six colors.

Pelican 1120 Guard Box
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.
This case is NATO codified and tested to IP-67 (Ingress Protection). You break it, we replace it... forever.

Specifications: 8-1/4" x 6-9/16" x 3-9/16"

Pelican 1150 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.
This case is NATO codified and tested to IP-67 (Ingress Protection). You break it, we replace it... forever.
Specifications: 9-1/4" x 7-9/16" x 4-3/8"

Pelican 1200 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case™ that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.

This case is NATO codified and tested to IP-67 (Ingress Protection). You break it, we replace it... forever.

Specifications: 10-5/8" x 9-11/16" x 4-7/8"

Pelican 1300 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case™ that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock.

This case is NATO codified and tested to IP-67 (Ingress Protection). You break it, we replace it... forever.

Specifications: 10-5/8" x 9-11/16" x 6-7/8"

Pelican 1400 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican™ Protector Case™ that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam of the case for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).
This case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). You break it, we replace it... forever.
Specifications: 13-3/8" x 11-5/8" x 6"

Pelican 1450 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total; protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).
This case is NATO codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection). You break it, we replace it... forever.
Specifications: 16" x 13" x 6-7/8"

Pelican 1470  Attaché/Computer Case
Like all Pelican Protector Equipment Cases™, the #1470 Case is watertight, dustproof and corrosion proof. The #1470 Case has a slim attaché design and offers total protection for your equipment. It comes equipped with a padded protective lid organizer, a polyurethane shock absorbing tray with lock down Velcro® strap, padded fold down handle, and a removable padded ergonomic shoulder strap. A nameplate (included) can be personalized (engraved at additional cost).
1470AC Attaché Case w/Insert - w/Lid Organizer, Lined Bottom.
1470CC#1 Computer Case (Deluxe) (for up to 13" (33 cm) computer screens) w/Lid Organizer, Fitted Shock Absorbing Tray, Removable Shoulder Strap.
1470CC#2 Computer Case (Standard) (for up to 13" (33 cm) computer screens) w/Lid Organizer, Density Pick ‘N’ Pluck™ Foam, Removable Shoulder Strap.
You break it, we replace it... forever.

Specifications: 16-11/16" x 13-1/16" W x 4-3/8"

Pelican 1490  Attaché/Computer Case
Like all Pelican™ Protector Equipment Cases, the new #1490 Computer Case is watertight, dust proof, crush proof, and corrosion proof. The #1490 Case is molded of advanced ultra high impact copolymer resin, protects valuable laptop computers from handling abuse and all weather conditions. The deluxe model (1490CC1) includes a padded lid organizer and shock absorbing tray, lock down velcro safety strap, removable padded shoulder strap, keyed locking latches, atmospheric purge valve, o-ring seal and padded fold down handle.
1490AC Attaché Case w/Insert - w/Lid Organizer, Lined Bottom .
1490CC#1 Computer Case (Deluxe) (Fits computers up to 16-7/8" x 10-3/8" x 2-1/2") w/Lid Organizer, Fitted Shock Absorbing Tray, Removable Shoulder Strap.
1490CC#2 Computer Case (Standard) (Fits computers up to 16-7/8" x 10-3/8" x 2-1/2") w/Lid Organizer, Density Pick ‘N’ Pluck™ Foam, Removable Shoulder Strap.
You break it, we replace it... forever.
Specifications: 19-7/16" x 13-15/16" x 4-11/16"

Pelican 1500 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total subjection and protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).
This case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection) and ATA (Air Transportation Association). You break it, we replace it... forever.
Specifications: 18-1/2" x 14-1/16" x 6-15/16"

Pelican 1520 Case
Unbreakable, watertight, dustproof, chemical resistant and corrosion proof. These are some of the features of this Pelican Protector Case™ that offers total protection for your equipment. It is made of Ultra High Impact structural copolymer that makes it extremely strong and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. Your equipment can fit into the high density foam or padded dividers for total protection against impact, vibration or shock. A nameplate (included) can be personalized (engraved at additional cost).
This case is NATO-codified and tested to MIL C-4150J (Military Standard), IP-67 (Ingress Protection). You break it, we replace it... forever.

Specifications: 19-1/8" x 15-7/16" x 7-9/16"

Pelican 1550 Case
Unbreakable, watertight, dustproof, ch